SAE J2517 SEP2010
J2856_H-III50_Draft_users_manual_conv_01202015
95th DUMMY RULESJ2860_201209
J2949_201503_50th_ANKLE
Vol.78 Recommendations on Dummies Specifications
Comments on Dummies Observations
FRONTAL IMPACT TESTING（US NCAP）
FRONTAL IMPACT TEST（NCAP）
SIDE IMPACT POLE TEST（NCAP）
SIDE IMPACT RIGID POLE TEST（US NCAP）
SIDE IMPACT MOVING DEFORMABLE BARRIER TEST（US NCAP）
HARMONIZATION OF SIDE IMPACT DUMMIES
FMVSS No. 226 EJECTION MITIGATION
PEDESTRIAN HEADFORM IMPACTOR (JNCAP ISO-GTR)
SURFACE VEHICLE INFORMATION REPORT-DRAFT
JASTI主動處理RoHS2違禁物質。
2015年6月，歐盟委員會發布了一個命名為(EU)2015/863的新指令來修改了 RoHS 2 (Directive 2011/65/EU)的附件二以增加下面四種鄰苯二甲酸鹽：
- ? Bis(2-Ethylhexyl) phthalate (DEHP)
- ? Benzyl butyl phthalate (BBP)
- ? Dibutyl phthalate (DBP)
- ? Diisobutyl phthalate (DIBP)
上述這四種鄰苯二甲酸化合物，在日本被廣泛用作聚氯乙烯增塑劑，而歐盟的新RoHS2法規將在2019年后施行。
JASTI在過去曾使用DINP材料作為聚氯乙烯的增塑劑，雖然DINP材料目前并不在法規所列的違禁材料列表中，但是我們考慮到DINP材料可能會在將來被添加進法規所列違禁材料中去，出于這個原因，我們棄用了DINP，將聚氯乙烯增塑劑的材料改為沒有任何酸性氣體產生的材料。這則訊息在JASTI 2017版的產品手冊中有被提到。
目前，JASTI使用的聚氯乙烯增塑劑材料是沒有任何酸性氣體產生的環保材料，并且產品的重量和硬度仍然可以達到法規圖紙的要求值。
如您想了解關于針對假人的RoHS2相關細節，請隨時聯絡我們。
Design and performance specification for the WorldSID 50th percentile male side impact dummy-Part 5:Dummy design updated
ISO 15830 WSID 50th第1，2，3，4部分，第二版在2013年的5月由ISO TC22/SC36/WG5發布。該工作組在三年后的2016年2月又有了更新，我們稱之為第5部分。
請參考附件技術情報中的細節。部分重量被重新評估并更改。手臂及腳踝的可移動區域也被更改。骨盆內部模型也按照更新后的規格被修改。
另一方面，市場上對生物仿真度的要求出現了E,F,G等一些非標版本。JASTI在2014年11月6日圣地亞哥的ISO/TC22/SC12/WG5工作組會議上就提出該假人的頭部及頸部是可以按照原始的標準來制造的。因此，基于我們研發結果的標準從未被修改過。
Comments_and_reference_about_Lumbar_Flexion_test_procedure_and_result
JTC-240401 Nodding Block
- Hardness requirement on the drawing: Durometer range from 80 to 90.
JASTI Nodding Blocks: Durometer hardness of 80, 82, 85, 87, 90 (5 models) are available 
Features
- Maximum Rotation angle, moment, and time that required for neck test are adjustable.
- The test can be done more efficiently by adjusting the duromenter hardness of nodding block when necessary.
JTC-240402 Rubber Parts
Features
From rubber compounding to manufacturing of rubber, JASTI ensures the characteristics of neck, nodding block, lumbar spine, knee insert, ankle bumper meet the requirements We manufacturer customized products to satisfied each customer’s need.
JTC-240403 Lumbar Spine
- Hardness requirement on the drawing: Durometer range from 75 to 85 (Hybrid-III 50th)
JTC-240403 Lumbar Spine Hardness requirement on the drawing: Durometer range from 75 to 85 (Hybrid-III 50th) JASTI lumbar spine: Durometer range from 80 +/- 1 (Under our quality control) 
Specifications
The hardness of lumbar spine is an important factor which affects the movement of the upper part of dummy and the impact value on ribs. For the reason, we have been testing lumbar spine (for Hybrid-III 50th, Hybrid-III 5F, 6-year-old, 3-year-old dummies…etc) on a Torso bending test equipment to observe and record the bending characteristics of upper torso.
As the lumbar spine of Hybrid-III 50th is in a curve shape, it is necessary for controlling the hardness of the rubber in that we control the performances.
JTC-240404 Pelvis
Through closely control of skin and fillers ratio during production, we provide and ensure quality of Hip Joint that meets the requirements of characteristics tests. Through our long experiences in researches and their results, we are able to provide Hip Joints that meet each customer’s specific requirements.
JTC-240405 Knee Flesh Insert
- The requirements from the drawing: Durometer 40 to 50°(Hybrid-III 50th)
JASTI Knee Flesh Insert: Durometer soft; 42°, Normal 45°, Hard: 47°(3 models available) 
Features
Knee Flesh Inserts can be used for brand new or worn Knee Flesh by adjusting the hardness of the rubber.
SID-II's_Federal_Register_Final_Rule
ES-2re_Federal_Register_Final_Rule
2013-21128_Federal Register
2013-17630
Vol.77, No. 38/Monday, February 27, 2012
Vol.76, No. 106/Thursday, June 2 2011
